Lake County
Astor floors, poured properly
Metallic pours, flake garage floors, polished concrete and outdoor coatings for Astor homes and businesses. Same prep, same materials, whether you are ten minutes from the shop or ninety.
Pour a floor in Astor
Or call (941) 504-9132.
Local conditions
Coating concrete in Astor
Astor is in Lake County. Rolling hills and chains of lakes, unusual for Florida. Clermont and Minneola are fast-growing with new slabs, while Mount Dora and Eustis have genuinely old housing stock where slab condition varies wildly house to house.
Florida makes every one of these jobs a moisture question first. Sandy subgrade and a high water table mean slabs move vapor upward constantly, and a coating that traps it will bubble and let go no matter how good the resin was. So we read the slab first.
The other local factor is the weather window. Afternoon storms and high humidity affect cure times, which is why we give you real dates rather than a generic three-day promise.
Northeast run, usually grouped with Orange and Seminole work.
Prep does not change with the ZIP code. Diamond grinding, crack and pinhole repair, primer, then the system you chose. A Astor garage gets exactly what one ten minutes from our shop gets.
Services
What we install for Astor clients
Every system below is available across Lake County.
Getting to you
Scheduling a Astor job
Northeast run, usually grouped with Orange and Seminole work. We cover Lake County as part of a 120-mile radius out of Sarasota, and jobs in the same direction get grouped so nobody pays for a wasted trip.
Call or send the room size and a photo of the slab. We will tell you the system, the day count, and when you can walk on it and park on it.
Nearby: Clermont · Leesburg · Tavares · Eustis · Mount Dora · Fruitland Park
Send us the space
Or call (941) 504-9132.
Choosing a system
Which floor suits a Astor property
Four systems cover almost everything we install. The slab and the room decide which one, not the price list.
Metallic
Pigment moved by hand while the resin is still open, which is why no two floors match. It suits a space you actually look at: a living room, a showroom, a garage that is part of the house rather than behind it.
Polyaspartic
Cures fast and holds color under ultraviolet light. This is the answer when a business cannot close for a week, or when the floor spends the afternoon with the door up.
Grind and seal
Polishes and seals the concrete already there, with no build on top. The cheapest route to a floor that stops dusting and staining, and the right call when the slab itself is worth showing.
Flake
The default for a garage. Vinyl chip broadcast into the base coat and sealed under clear, so it hides dust and tire marks and keeps grip when a car comes in wet. Eighteen blends, and we bring samples so you see them in your own light.
Whatever goes on top, the preparation underneath is the same and it is not negotiable. We diamond grind the slab to open the surface, chase and fill cracks, and take a moisture reading before quoting. Florida slabs sit on sand with a high water table and move vapor upward constantly, so a coating that traps it will bubble and let go no matter how good the resin was. Skipping that step is why people end up stripping a floor they paid for two years earlier.
Questions
Astor questions
Do you actually work in Astor?
Yes. Astor sits inside our 120-mile service radius from Sarasota, and we run this area regularly. Distance affects scheduling, not whether we come out.
Is Astor covered under Lake County?
It is. Astor is in Lake County, and you can see every city we cover there on the county page. Northeast run, usually grouped with Orange and Seminole work.
How soon can you get to a job in Astor?
Two things decide it: how far out you are and what is already on the schedule. We batch work by direction rather than driving the same road twice, so ringing at the start of the week usually gets you in sooner.
What does a garage floor cost?
Not by the square foot alone. A clean slab that needs nothing but grinding costs far less to prepare than one that has to be stripped, chased and patched first, which is why we read the floor before quoting rather than after.
Do you grind, or just coat over what is there?
Always ground, never just coated. Acid etching barely touches a hard-troweled slab, and a coating with nothing to grip is a coating that peels in sheets later.
Can you coat outdoor concrete in Florida?
Yes, with the right system. Standard epoxy ambers and turns slick under ultraviolet light, so exterior work gets a UV-stable polyaspartic or polyurea with texture in the topcoat for pool decks, lanais and patios.
How long before I can park on it?
Foot traffic is usually the day after the clear coat and vehicles about four to five days after, depending on humidity. You get exact dates for your job before we start.
Tell us where you are and what you have.
Rough size and a photo of the slab is enough to get a real number back. No showroom visit, no pressure.
Pour my floor
Or call (941) 504-9132.