Commercial
Colored quartz, broadcast to refusal
Quartz systems swap vinyl flake for graded, color-coated quartz sand broadcast into the resin. The result is thicker, considerably harder underfoot, and grippy even when wet, which is why it ends up in kitchens, wash-down rooms and clinical spaces rather than garages.
Pour this floor
Tell us the space and rough size. Or call (941) 504-9132.
Detail
Quartz against flake
Flake is a thin vinyl chip that lies flat and mainly does a visual job. Quartz is a hard mineral granule with real bulk, so a quartz build finishes up several times thicker than a flake floor and behaves more like a screed than a coating.
That thickness buys two things. It buys abrasion resistance, because you are wearing against quartz rather than against resin. And it buys texture that survives, since the grip comes from the shape of the aggregate rather than a gritted topcoat that sands away under traffic.
The compromise is appearance and price. Quartz reads as a speckled industrial surface rather than a decorative one, and both the material and the labor cost more than flake.
Wet areas and hygiene
Quartz systems are the standard answer where floors get washed down. The aggregate keeps a slip rating with water on it, and the resin binder can be built up into a cove at the wall so there is no square junction for grease and water to sit in.
That coving matters more than people expect. Health inspectors look at the wall junction, and a coved, sealed transition means a floor that can be hosed and squeegeed rather than mopped around the edges forever.
Drains get detailed too. We terminate the coating into the drain with a proper fall so water leaves the floor instead of pooling at a low spot and sitting there until the next shift.
Build sequence and downtime
A quartz floor goes down as a primer, a body coat with quartz broadcast to refusal, a sweep and vacuum of the loose aggregate, then one or two grout coats to fill between the granules and lock the surface.
How many grout coats you get is a real decision. More grout gives a smoother, easier-to-clean surface with less grip; fewer leaves an open texture with more bite. We set that against how wet and how greasy the floor gets in practice.
Plan on a longer closure than a flake job because of the extra coats. For a restaurant or a clinic we run the work through consecutive closed days and pick topcoats with a cure window that fits.
Preparation
What happens before any resin comes out
A commercial floor gets inspected, walked on all day and cleaned with things nobody would use at home, so the bond has to be right before anything else is discussed.
The first day is the grinder. We work the slab with diamond tooling until it is uniformly open, vacuuming as we go so the dust stays out of the house. Skip this and you are relying on the resin to stick to a sealed surface, which is the reason so many coatings come up in sheets.
After grinding we measure what the slab is doing with water. Sandy subgrade and a shallow water table make vapor drive a constant in this climate, and it is the failure nobody sees coming because the floor looks perfect for the first season. We test before quoting so the system suits the slab.
Cracks get chased out to a clean edge and filled rather than skimmed over, spalls and pop-outs get rebuilt, and any previous coating comes off entirely. Only when the slab is sound, open and dry does anything get mixed.
The finish is what you see. The grind underneath it is what decides whether you are still happy in year eight, and it is where we spend the time other quotes save money.
It is also why we will occasionally tell someone their slab needs repair before it needs a coating. A floor that should be fixed structurally is not a floor we will put resin on, because the crack comes back through and then it is our name on it.
Related work
Garage Floor Coatings
A garage floor takes more punishment than anything else in the house. Hot tires, dropped tools, road salt in winter…
See the system →Epoxy Garage Floors
Epoxy earned its reputation twice over: once as the toughest thing you can put on a garage slab, and once as the…
How it works →Polyaspartic Floor Coatings
Polyaspartic is what you use when the space cannot be out of service for a week and when the floor is going to see…
Read the detail →Flake Epoxy Flooring
Flake is vinyl chip broadcast into a wet base coat until the floor will not take any more, then sealed under clear.…
What it suits →Questions
Quartz Epoxy Flooring questions
How much does quartz epoxy flooring cost?
Price follows square footage, the condition of the slab and the system you choose. A sound slab that only needs grinding costs far less to prepare than one with cracks, old coating or a moisture problem. We look at the floor and give you a real number rather than a range that means nothing.
How long does quartz epoxy flooring take?
Most residential work is two to four days on site depending on size and system. Commercial and industrial floors are scheduled around your hours and often run nights or weekends. You get exact dates before we start, including when you can walk on it and when you can put weight on it.
Do you grind the floor first?
Always. Diamond grinding is the only way to get a profile the coating can key into, and it is the single biggest reason floors either last or fail. We do not acid etch and we do not coat over a sealed slab.
What about moisture in the slab?
Florida slabs move water upward constantly, and vapor trapped under a coating is a guaranteed failure. We take a reading before quoting. If the numbers are high we specify a moisture-tolerant primer rather than pretending the problem is not there.
Can you match a color or a look I have seen?
Usually. We carry eighteen flake blends and mix metallic per floor, so bring a photo, a cabinet door or a paint chip and we will get close. We put samples down in your own light before you commit.
Do you work outside Sarasota?
Yes. We cover a 120-mile radius from Sarasota, which is twenty-four counties from Naples up to Ocala and across to Orlando. Check the service areas page or call and ask.
Send us the space. We will send back a number.
Rough size and a photo is enough to start. We cover Sarasota and twenty-four counties around it, so tell us where you are and we will tell you when we can get there.
Pour this floor
Or call (941) 504-9132.